Deal With Your Problem Best By Getting The Sidewalk Repair Contractor

Keeping the concrete sidewalks clean and in good condition is very important for the owner of any house for the safety of the family members and guests. In case of a business firm also a broken sidewalk can cause severe damage of reputation particularly if a visitor falls down on the premises. You have the fear of that person filing a lawsuit against you also. Therefore it is imperative that a damaged part be repaired immediately. You will of course need an expert for the purpose so that the work done is on a professional a level and does not create any problem in future.

Survey the damage

Before hiring someone to work for you survey the damage yourself. Stroll around the property and find out the problem spots. Find out if they are cracked, raised or plain broken. There are a number of things that a contractor can do for you.  Most people fear that an uneven surface is a huge repair project. But that is not the case at all. It may just be a simple work that takes a little replacement or repair. You need to get a contractor to come and take a look at the damage. An estimated can also be taken for the repair.

1. 

Replacing the concrete

Sometimes a complete replacement may be necessary and so that the sidewalk is safe. A Sidewalk repair contractor is likely to break the paving with the help of a drill to break up the section that needs to be replaced. The broken concrete bits will have to be removed and then work on the area started. The right contractor will give you an idea of the kind of work that is needed, the time period it will take and the cost. A broken footpath may have been caused by a number of reasons. Tree roots are the main cause most of the time.

Getting the work done

An experienced builder will remove the cause of the damage and start the repair work in the shape that is necessary. The rest of the area will also be paved and leveled with the remaining concrete section. The leveling is very necessary so that further accidents do not happen. Once the section is dried it will be opened for regular use. Normally a process called mudjacking is used by the sidewalk repair contractor nyc to repair the area. The concrete is poured through four holes made in the slab so that it can rise and become leveled with the rest of the area.

What is mudjacking

The process of mud jacking takes more than a day to be completed and dried, but it can actually be finished at a minimum cost which is why most opt for it. However if the sidewalk is majorly damaged and a total replacement is necessary then this is not the option. Tearing and replacing an entire stretch or even a slab can be very tiresome and time consuming. It will also be very harassing for the passers-by because they will have to take a roundabout way to reach their destinations. Mud jacking is for leveling the ground after the repair.

Hiring the right person

While you are about to repair the sidewalk it is essential to find the right person for the job so that you don’t end up wasting your money. You can hire someone after going through the list of contractors on the Internet. If a neighbor or a relative has just repaired their property then also you can get to know of a reliable one. Check for the testimonials before hiring. Know what they have to say about the work. Don’t forget to enquire about the charges for the same.

Why fixing it is important

A well-repaired sidewalk is very necessary not just for enhancing the beauty of the property but also for maintaining the value of the property. A well-maintained one fetches a lot of money which is very essential when you are selling a property. It is almost worth maintaining the place for the investment returns. The appearance of the house is also very important and a matter of concern. 

Source : Click here

Try Brick Pointing New York To Make An Old Wall Look New

Brick pointing is very important for renovating and repairing old houses. It is the method of applying mortar on the brick joints that are either newly laid or that needs reworking. If the bricks are new, then the method helps in strengthening the structure from becoming weather beaten. But if it is old then the mortars are put for the purpose of repairing the structure. The aging mix usually cracks and disintegrates, so it is removed with the help of a sharp tool and replaced with new mortar of the same composition or something that is similar to the original.

What you need to know

Sometimes an entire wall or an entire structure has to be worked upon because it is difficult to point out the particular defective places and also many of the adjacent places may need repair. The mortar is usually packed in thin layers and applied with the help of a sharp tool to give a smooth and concave look. There is another method called tuck pointing where the process is the same except that the refined pointing is used for decorating a wall rather than repair. The job is simple enough, but it has to be done with care and caution.

Use the right equipment

The right kind of tools can make a lot of difference in the outcome of the pointing. They can help you avoid any damage to the brick or the appearance of the wall.  The mix has to be of the right kind to give a seamless appearance to Brick pointing New York. The horizontal joints have to be scraped out by at least ¾ inches for the pointing to be deep and effective. Using electric grinders should be avoided because unless you have a trained hand the brick is likely to be seriously disfigured.

Removing the old putting

Once you have carefully removed the mortar from the horizontal sides, it is time for the vertical joints. Try not to hit the edges of the bricks below or above so that they don’t get disfigured. A sharp painter’s tool can be used for the purpose. All the debris has to be cleared away with a stiff brush before beginning Brick pointing New York. You also need to check if the blade of the trowel to be used for putting the mortar fits the joint. If it does not, then you will have to shape its end.

Fill in with mortar
Before starting you will need to wet the wall thoroughly so that water starts dripping from it. You will have to wait for a day before filling the joints with mortar to allow the moisture to be soaked in so that the drying and filling take place nicely. You can mist the brick a second time before filling the joints with it. It helps the mortar to stay in place and fill in better. Be sure to eliminate any of the voids while filling the spaces with mortar. A lot of water needs to be used so that the mortar dries gradually and does not crack easily.

Brush and clean

Once the initial voids have been filled with the mix, it is necessary to fill the heads of the joints so that it gives a smooth finish to the wall. Don’t forget to scrape away excess mortar so that it does not cake up and make the wall look ugly. Once the mix appears firm to touch, it is time to give it a final brush. Brush it diagonally so as to remove any of the dried mortar crumbs that may hang on the wall. Never brush it along the lines of the mortar because that may bring out the mix and ruin the work.

Let it dry

You will have to sponge the mortar residue carefully away from the brick surfaces. Try to protect it from rain, sun, and wind for the next three days so that it can dry properly. You will need to mist the walls and the mortar regularly so that it does not dry up fast enough to cause cracks quickly. The process is easy enough, and anyone with the right tools can do it to save a wall from getting damaged.

Source : Click here       

Find Out The Best And Effective Basement Waterproofing Queens Techniques

Waterproofing is essential for any part of the house whether it is the roof or the basement if you want to live in that house for long. For starters, it lets you use the basement for a lot of purposes include storing objects. The best time to do is when the house is being built because you can take care of the small spaces also which later on become unreachable after construction. Professional help is mandatory for doing the waterproofing so that it is done rightly in the first time itself. For old houses, the space has to be checked thoroughly before starting work.

Stop water entry

You can try the external as well as the internal method of waterproofing.

•    While doing it from the outside, a bonding substance is used on the walls of the area.

•    Polymers used for the purpose that can make the structures last for years.

•    It helps in stopping the process of mold formation which can damage the house extensively. It is also the best way of keeping the house dry, warm and safe.

•    Make sure that tanking is done while the house is constructed.

More on the external system

Building the French drain is also another way of external waterproofing.

•    It is mostly for areas that receive a lot of heavy rainfall, and the weather is moisture laden. The external method of Basement waterproofing queens is the best way to maintain buildings and is recognized by the International Building Code. It is considered the best way to keep away water from harming any structure.

•    The construction of the outside drainage system is also very important. The basement is built in a way that the floors slope towards the sump pump of the home.

•    A honeycomb-like structure is built so that the water drainage takes place efficiently. 

The internal system

In the internal method, you can protect the walls and the floor from water seepage by applying a layer of sealant which keeps the mold at bay. The sealants are technically not meant for weather proofing but can help in preventing entry of moisture. It helps in maintaining the level of atmospheric humidity in the basement. It also stops the water from spilling over to other areas of the house in case water collects in the underground room.  You can also try the interior water drainage system in Basement waterproofing queens for passing the water from the foundation footers and then under the basement floor.

Design it well

The presence of a sump pump solves the problem but in case there is no power the drainage system should come into effect. Newly built underground rooms can be made from waterproof concrete blocks of good grade which can offer protection right from the beginning. A well-designed one is usually so thick that water cannot penetrate inside it. But the construction joints can always be weak and allow water seepage. Ideally before constructing a house you should sit with a qualified builder and work out the pros and cons of the methods of waterproofing.  
For more info click here : contractors in brooklyn ny
Source : Click here